never trading
#1
Sad 
hi all please help me i cant make any trade with gekko i do all thing and have BTC in bitfinex that gekko show my account but never make a trade its my config help please its make me crazy.....

// Everything is explained here:
// @link https://gekko.wizb.it/docs/commandline/plugins.html

var config = {};

// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//                          GENERAL SETTINGS
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

config.debug = true; // for additional logging / debugging

// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//                         WATCHING A MARKET
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

config.watch = {

  // see https://gekko.wizb.it/docs/introduction/...anges.html
  exchange: 'bitfinex',
  currency: 'BTC',
  asset: 'SAN',

  // You can set your own tickrate (refresh rate).
  // If you don't set it, the defaults are 2 sec for
  // okcoin and 20 sec for all other exchanges.
  // tickrate: 20
}

// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//                       CONFIGURING TRADING ADVICE
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

config.tradingAdvisor = {
  enabled: true,
  method: 'CCI',
  candleSize: 5,
  historySize: 5,
}

// Exponential Moving Averages settings:
config.DEMA = {
  // EMA weight (α)
  // the higher the weight, the more smooth (and delayed) the line
  weight: 21,
  // amount of candles to remember and base initial EMAs on
  // the difference between the EMAs (to act as triggers)
  thresholds: {
    down: -0.025,
    up: 0.025
  }
};

// MACD settings:
config.MACD = {
  // EMA weight (α)
  // the higher the weight, the more smooth (and delayed) the line
  short: 10,
  long: 21,
  signal: 9,
  // the difference between the EMAs (to act as triggers)
  thresholds: {
    down: -0.025,
    up: 0.025,
    // How many candle intervals should a trend persist
    // before we consider it real?
    persistence: 1
  }
};

// PPO settings:
config.PPO = {
  // EMA weight (α)
  // the higher the weight, the more smooth (and delayed) the line
  short: 12,
  long: 26,
  signal: 9,
  // the difference between the EMAs (to act as triggers)
  thresholds: {
    down: -0.025,
    up: 0.025,
    // How many candle intervals should a trend persist
    // before we consider it real?
    persistence: 2
  }
};

// Uses one of the momentum indicators but adjusts the thresholds when PPO is bullish or bearish
// Uses settings from the ppo and momentum indicator config block
config.varPPO = {
  momentum: 'TSI', // RSI, TSI or UO
  thresholds: {
    // new threshold is default threshold + PPOhist * PPOweight
    weightLow: 120,
    weightHigh: -120,
    // How many candle intervals should a trend persist
    // before we consider it real?
    persistence: 0
  }
};

// RSI settings:
config.RSI = {
  interval: 14,
  thresholds: {
    low: 30,
    high: 70,
    // How many candle intervals should a trend persist
    // before we consider it real?
    persistence: 1
  }
};

// TSI settings:
config.TSI = {
  short: 13,
  long: 25,
  thresholds: {
    low: -25,
    high: 25,
    // How many candle intervals should a trend persist
    // before we consider it real?
    persistence: 1
  }
};

// Ultimate Oscillator Settings
config.UO = {
  first: {weight: 4, period: 7},
  second: {weight: 2, period: 14},
  third: {weight: 1, period: 28},
  thresholds: {
    low: 30,
    high: 70,
    // How many candle intervals should a trend persist
    // before we consider it real?
    persistence: 1
  }
};

// CCI Settings
config.CCI = {
    constant: 0.015, // constant multiplier. 0.015 gets to around 70% fit
    history: 5, // history size, make same or smaller than history
    thresholds: {
        up: 100, // fixed values for overbuy upward trajectory
        down: -100, // fixed value for downward trajectory
        persistence: 0 // filter spikes by adding extra filters candles
    }
};

// StochRSI settings
config.StochRSI = {
  interval: 3,
  thresholds: {
    low: 20,
    high: 80,
    // How many candle intervals should a trend persist
    // before we consider it real?
    persistence: 3
  }
};


// custom settings:
config.custom = {
  my_custom_setting: 10,
}

config['talib-macd'] = {
  parameters: {
    optInFastPeriod: 10,
    optInSlowPeriod: 21,
    optInSignalPeriod: 9
  },
  thresholds: {
    down: -0.025,
    up: 0.025,
  }
}

// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//                       CONFIGURING PLUGINS
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

// do you want Gekko to simulate the profit of the strategy's own advice?
config.paperTrader = {
  enabled: false,
  // report the profit in the currency or the asset?
  reportInCurrency: true,
  // start balance, on what the current balance is compared with
  simulationBalance: {
    // these are in the unit types configured in the watcher.
    asset: 1,
    currency: 100,
  },
  // how much fee in % does each trade cost?
  feeMaker: 0.15,
  feeTaker: 0.25,
  feeUsing: 'maker',
  // how much slippage/spread should Gekko assume per trade?
  slippage: 0.05,
}

config.performanceAnalyzer = {
  enabled: true,
  riskFreeReturn: 5
}

// Want Gekko to perform real trades on buy or sell advice?
// Enabling this will activate trades for the market being
// watched by `config.watch`.
config.trader = {
  enabled: true,
  key: 'xxxxxxx',
  secret: 'xxxxx',
  username: '', // your username, only required for specific exchanges.
  passphrase: '', // GDAX, requires a passphrase.
  orderUpdateDelay: 1, // Number of minutes to adjust unfilled order prices
}

config.adviceLogger = {
  enabled: false,
  muteSoft: true // disable advice printout if it's soft
}

config.pushover = {
  enabled: false,
  sendPushoverOnStart: false,
  muteSoft: true, // disable advice printout if it's soft
  tag: '[GEKKO]',
  key: '',
  user: ''
}

// want Gekko to send a mail on buy or sell advice?
config.mailer = {
  enabled: false,       // Send Emails if true, false to turn off
  sendMailOnStart: true,    // Send 'Gekko starting' message if true, not if false

  email: '',    // Your Gmail address
  muteSoft: true, // disable advice printout if it's soft

  // You don't have to set your password here, if you leave it blank we will ask it
  // when Gekko's starts.
  //
  // NOTE: Gekko is an open source project < https://github.com/askmike/gekko >,
  // make sure you looked at the code or trust the maintainer of this bot when you
  // fill in your email and password.
  //
  // WARNING: If you have NOT downloaded Gekko from the github page above we CANNOT
  // guarantuee that your email address & password are safe!

  password: '',       // Your Gmail Password - if not supplied Gekko will prompt on startup.

  tag: '[GEKKO] ',      // Prefix all email subject lines with this

            //       ADVANCED MAIL SETTINGS
            // you can leave those as is if you
            // just want to use Gmail

  server: 'smtp.gmail.com',   // The name of YOUR outbound (SMTP) mail server.
  smtpauth: true,     // Does SMTP server require authentication (true for Gmail)
          // The following 3 values default to the Email (above) if left blank
  user: '',       // Your Email server user name - usually your full Email address 'me@mydomain.com'
  from: '',       // 'me@mydomain.com'
  to: '',       // 'me@somedomain.com, me@someotherdomain.com'
  ssl: true,        // Use SSL (true for Gmail)
  port: '',       // Set if you don't want to use the default port
}

config.pushbullet = {
    // sends pushbullets if true
  enabled: false,
    // Send 'Gekko starting' message if true
  sendMessageOnStart: true,
    // disable advice printout if it's soft
  muteSoft: true,
    // your pushbullet API key
  key: 'xxx',
    // your email, change it unless you are Azor Ahai
  email: 'jon_snow@westeros.org',
    // will make Gekko messages start mit [GEKKO]
  tag: '[GEKKO]'
};

config.kodi = {
  // if you have a username & pass, add it like below
  // http://user:pass@ip-or-hostname:8080/jsonrpc
  host: 'http://ip-or-hostname:8080/jsonrpc',
  enabled: false,
  sendMessageOnStart: true,
}

config.ircbot = {
  enabled: false,
  emitUpdates: false,
  muteSoft: true,
  channel: '#your-channel',
  server: 'irc.freenode.net',
  botName: 'gekkobot'
}

config.telegrambot = {
  enabled: false,
  emitUpdates: false,
  token: 'YOUR_TELEGRAM_BOT_TOKEN',
  botName: 'gekkobot'
}

config.twitter = {
    // sends pushbullets if true
  enabled: false,
    // Send 'Gekko starting' message if true
  sendMessageOnStart: false,
    // disable advice printout if it's soft
  muteSoft: false,
  tag: '[GEKKO]',
    // twitter consumer key
  consumer_key: '',
    // twitter consumer secret
  consumer_secret: '',
    // twitter access token key
  access_token_key: '',
    // twitter access token secret
  access_token_secret: ''
};

config.xmppbot = {
  enabled: false,
  emitUpdates: false,
  client_id: 'jabber_id',
  client_pwd: 'jabber_pw',
  client_host: 'jabber_server',
  client_port: 5222,
  status_msg: 'I\'m online',
  receiver: 'jabber_id_for_updates'
}

config.campfire = {
  enabled: false,
  emitUpdates: false,
  nickname: 'Gordon',
  roomId: null,
  apiKey: '',
  account: ''
}

config.redisBeacon = {
  enabled: false,
  port: 6379, // redis default
  host: '127.0.0.1', // localhost
    // On default Gekko broadcasts
    // events in the channel with
    // the name of the event, set
    // an optional prefix to the
    // channel name.
  channelPrefix: '',
  broadcast: [
    'candle'
  ]
}

config.slack = {
  enabled: false,
  token: '',
  sendMessageOnStart: true,
  muteSoft: true,
  channel: '' // #tradebot
}

config.ifttt = {
  enabled: false,
  eventName: 'gekko',
  makerKey: '',
  muteSoft: true,
  sendMessageOnStart: true
}

config.candleWriter = {
  enabled: false
}

config.adviceWriter = {
  enabled: false,
  muteSoft: true,
}

// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//                       CONFIGURING ADAPTER
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

config.adapter = 'sqlite';

config.sqlite = {
  path: 'plugins/sqlite',

  dataDirectory: 'history',
  version: 0.1,

  journalMode: require('./web/isWindows.js') ? 'DELETE' : 'WAL',

  dependencies: []
}

  // Postgres adapter example config (please note: requires postgres >= 9.5):
config.postgresql = {
  path: 'plugins/postgresql',
  version: 0.1,
  connectionString: 'postgres://user:pass@localhost:5432', // if default port
  database: null, // if set, we'll put all tables into a single database.
  schema: 'public',
  dependencies: [{
    module: 'pg',
    version: '6.1.0'
  }]
}

// Mongodb adapter, requires mongodb >= 3.3 (no version earlier tested)
config.mongodb = {
  path: 'plugins/mongodb',
  version: 0.1,
  connectionString: 'mongodb://mongodb/gekko', // connection to mongodb server
  dependencies: [{
    module: 'mongojs',
    version: '2.4.0'
  }]
}

// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//                       CONFIGURING BACKTESTING
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

// Note that these settings are only used in backtesting mode, see here:
// @link: https://gekko.wizb.it/docs/commandline/backtesting.html

config.backtest = {
  daterange: 'scan',
  batchSize: 50
}

// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//                       CONFIGURING IMPORTING
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

config.importer = {
  daterange: {
    // NOTE: these dates are in UTC
    from: "2018-02-01 00:00:00"
  }
}

// set this to true if you understand that Gekko will
// invest according to how you configured the indicators.
// None of the advice in the output is Gekko telling you
// to take a certain position. Instead it is the result
// of running the indicators you configured automatically.
//
// In other words: Gekko automates your trading strategies,
// it doesn't advice on itself, only set to true if you truly
// understand this.
//
// Not sure? Read this first: https://github.com/askmike/gekko/issues/201
config['I understand that Gekko only automates MY OWN trading strategies'] = true;

module.exports = config;

the result:


.jpg   11.jpg (Size: 198.69 KB / Downloads: 16)

and after long time:


.jpg   12.jpg (Size: 283.73 KB / Downloads: 16)
  Reply
#2
Hi dear

You must set the API keys into your config.js

Under key enter the API key
Under Secret enter your API secret

First in your bitfinex account you MUST CREATE a new API key AND enable options like Trading AND read your FUNDS
Otherwise gekko HAS NO ACCESS TO YOUR ACCOUNT and cannot read your balances.
THIS KEY WOULD BE ONLY FOR GEKKO
for other Apps you would create a new API in bitfinex

Code:
// Want Gekko to perform real trades on buy or sell advice?
// Enabling this will activate trades for the market being
// watched by `config.watch`.
config.trader = {
 enabled: true,
 key: 'xxxxxxx',
 secret: 'xxxxx',
 username: '', // your username, only required for specific exchanges.
 passphrase: '', // GDAX, requires a passphrase.
 orderUpdateDelay: 1, // Number of minutes to adjust unfilled order prices
}
  Reply
#3
(02-18-2018, 12:37 AM)thanks my friend but i set API key in my config file just dont want to show them in public and set with xxxx if you see my result photo gekko show my btc in my bitfinex account and just dont make any trade... Wrote:   Hi dear

You must set the API keys into your config.js

Under key enter the API key
Under Secret enter your API secret

First in your bitfinex account you MUST CREATE a new API key AND enable options like Trading AND read your FUNDS
Otherwise gekko HAS NO ACCESS TO YOUR ACCOUNT and cannot read your balances.
THIS KEY WOULD BE ONLY FOR GEKKO
for other Apps you would create a new API in bitfinex

Code:
// Want Gekko to perform real trades on buy or sell advice?
// Enabling this will activate trades for the market being
// watched by `config.watch`.
config.trader = {
 enabled: true,
 key: 'xxxxxxx',
 secret: 'xxxxx',
 username: '', // your username, only required for specific exchanges.
 passphrase: '', // GDAX, requires a passphrase.
 orderUpdateDelay: 1, // Number of minutes to adjust unfilled order prices
}
  Reply
#4
no one to help? its very difficult?
  Reply
#5
nice clarifications to you
Get the bitfinex stock (api).

Write (key) (secret)
// watched by `config.watch`.
config.trader = {
enabled: true,
key: 'xxxxxxx',

secret: 'xxxxx',
username: '', // your username, only required for specific exchanges.
passphrase: '', // GDAX, requires a passphrase.
  Reply
#6
(02-21-2018, 06:32 AM)i said i write secret and key without problem and gekko can connect to my bitfinex account but after long time no trade and dont make first trade you just say enter sexrect and key?!!!!!!!! ankasem Wrote: nice clarifications to you
Get the bitfinex stock (api).

Write (key) (secret)
// watched by `config.watch`.
config.trader = {
enabled: true,
key: 'xxxxxxx',

secret: 'xxxxx',
username: '', // your username, only required for specific exchanges.
passphrase: '', // GDAX, requires a passphrase.
  Reply


Forum Jump:


Users browsing this thread: