+- Gekko Forum (https://forum.gekko.wizb.it)
+-- Forum: Gekko (https://forum.gekko.wizb.it/forum-13.html)
+--- Forum: Technical Support (https://forum.gekko.wizb.it/forum-19.html)
+--- Thread: never trading (/thread-1501.html)
never trading - henry - 02-17-2018
hi all please help me i cant make any trade with gekko i do all thing and have BTC in bitfinex that gekko show my account but never make a trade its my config help please its make me crazy.....
// Everything is explained here:
// @link https://gekko.wizb.it/docs/commandline/plugins.html
var config = {};
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// GENERAL SETTINGS
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
config.debug = true; // for additional logging / debugging
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// WATCHING A MARKET
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
config.watch = {
// see https://gekko.wizb.it/docs/introduction/supported_exchanges.html
exchange: 'bitfinex',
currency: 'BTC',
asset: 'SAN',
// You can set your own tickrate (refresh rate).
// If you don't set it, the defaults are 2 sec for
// okcoin and 20 sec for all other exchanges.
// tickrate: 20
}
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// CONFIGURING TRADING ADVICE
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
config.tradingAdvisor = {
enabled: true,
method: 'CCI',
candleSize: 5,
historySize: 5,
}
// Exponential Moving Averages settings:
config.DEMA = {
// EMA weight (α)
// the higher the weight, the more smooth (and delayed) the line
weight: 21,
// amount of candles to remember and base initial EMAs on
// the difference between the EMAs (to act as triggers)
thresholds: {
down: -0.025,
up: 0.025
}
};
// MACD settings:
config.MACD = {
// EMA weight (α)
// the higher the weight, the more smooth (and delayed) the line
short: 10,
long: 21,
signal: 9,
// the difference between the EMAs (to act as triggers)
thresholds: {
down: -0.025,
up: 0.025,
// How many candle intervals should a trend persist
// before we consider it real?
persistence: 1
}
};
// PPO settings:
config.PPO = {
// EMA weight (α)
// the higher the weight, the more smooth (and delayed) the line
short: 12,
long: 26,
signal: 9,
// the difference between the EMAs (to act as triggers)
thresholds: {
down: -0.025,
up: 0.025,
// How many candle intervals should a trend persist
// before we consider it real?
persistence: 2
}
};
// Uses one of the momentum indicators but adjusts the thresholds when PPO is bullish or bearish
// Uses settings from the ppo and momentum indicator config block
config.varPPO = {
momentum: 'TSI', // RSI, TSI or UO
thresholds: {
// new threshold is default threshold + PPOhist * PPOweight
weightLow: 120,
weightHigh: -120,
// How many candle intervals should a trend persist
// before we consider it real?
persistence: 0
}
};
// RSI settings:
config.RSI = {
interval: 14,
thresholds: {
low: 30,
high: 70,
// How many candle intervals should a trend persist
// before we consider it real?
persistence: 1
}
};
// TSI settings:
config.TSI = {
short: 13,
long: 25,
thresholds: {
low: -25,
high: 25,
// How many candle intervals should a trend persist
// before we consider it real?
persistence: 1
}
};
// Ultimate Oscillator Settings
config.UO = {
first: {weight: 4, period: 7},
second: {weight: 2, period: 14},
third: {weight: 1, period: 28},
thresholds: {
low: 30,
high: 70,
// How many candle intervals should a trend persist
// before we consider it real?
persistence: 1
}
};
// CCI Settings
config.CCI = {
constant: 0.015, // constant multiplier. 0.015 gets to around 70% fit
history: 5, // history size, make same or smaller than history
thresholds: {
up: 100, // fixed values for overbuy upward trajectory
down: -100, // fixed value for downward trajectory
persistence: 0 // filter spikes by adding extra filters candles
}
};
// StochRSI settings
config.StochRSI = {
interval: 3,
thresholds: {
low: 20,
high: 80,
// How many candle intervals should a trend persist
// before we consider it real?
persistence: 3
}
};
// custom settings:
config.custom = {
my_custom_setting: 10,
}
config['talib-macd'] = {
parameters: {
optInFastPeriod: 10,
optInSlowPeriod: 21,
optInSignalPeriod: 9
},
thresholds: {
down: -0.025,
up: 0.025,
}
}
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// CONFIGURING PLUGINS
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// do you want Gekko to simulate the profit of the strategy's own advice?
config.paperTrader = {
enabled: false,
// report the profit in the currency or the asset?
reportInCurrency: true,
// start balance, on what the current balance is compared with
simulationBalance: {
// these are in the unit types configured in the watcher.
asset: 1,
currency: 100,
},
// how much fee in % does each trade cost?
feeMaker: 0.15,
feeTaker: 0.25,
feeUsing: 'maker',
// how much slippage/spread should Gekko assume per trade?
slippage: 0.05,
}
config.performanceAnalyzer = {
enabled: true,
riskFreeReturn: 5
}
// Want Gekko to perform real trades on buy or sell advice?
// Enabling this will activate trades for the market being
// watched by `config.watch`.
config.trader = {
enabled: true,
key: 'xxxxxxx',
secret: 'xxxxx',
username: '', // your username, only required for specific exchanges.
passphrase: '', // GDAX, requires a passphrase.
orderUpdateDelay: 1, // Number of minutes to adjust unfilled order prices
}
config.adviceLogger = {
enabled: false,
muteSoft: true // disable advice printout if it's soft
}
config.pushover = {
enabled: false,
sendPushoverOnStart: false,
muteSoft: true, // disable advice printout if it's soft
tag: '[GEKKO]',
key: '',
user: ''
}
// want Gekko to send a mail on buy or sell advice?
config.mailer = {
enabled: false, // Send Emails if true, false to turn off
sendMailOnStart: true, // Send 'Gekko starting' message if true, not if false
email: '', // Your Gmail address
muteSoft: true, // disable advice printout if it's soft
// You don't have to set your password here, if you leave it blank we will ask it
// when Gekko's starts.
//
// NOTE: Gekko is an open source project < https://github.com/askmike/gekko >,
// make sure you looked at the code or trust the maintainer of this bot when you
// fill in your email and password.
//
// WARNING: If you have NOT downloaded Gekko from the github page above we CANNOT
// guarantuee that your email address & password are safe!
password: '', // Your Gmail Password - if not supplied Gekko will prompt on startup.
tag: '[GEKKO] ', // Prefix all email subject lines with this
// ADVANCED MAIL SETTINGS
// you can leave those as is if you
// just want to use Gmail
server: 'smtp.gmail.com', // The name of YOUR outbound (SMTP) mail server.
smtpauth: true, // Does SMTP server require authentication (true for Gmail)
// The following 3 values default to the Email (above) if left blank
user: '', // Your Email server user name - usually your full Email address 'me@mydomain.com'
from: '', // 'me@mydomain.com'
to: '', // 'me@somedomain.com, me@someotherdomain.com'
ssl: true, // Use SSL (true for Gmail)
port: '', // Set if you don't want to use the default port
}
config.pushbullet = {
// sends pushbullets if true
enabled: false,
// Send 'Gekko starting' message if true
sendMessageOnStart: true,
// disable advice printout if it's soft
muteSoft: true,
// your pushbullet API key
key: 'xxx',
// your email, change it unless you are Azor Ahai
email: 'jon_snow@westeros.org',
// will make Gekko messages start mit [GEKKO]
tag: '[GEKKO]'
};
config.kodi = {
// if you have a username & pass, add it like below
// http://user:pass@ip-or-hostname:8080/jsonrpc
host: 'http://ip-or-hostname:8080/jsonrpc',
enabled: false,
sendMessageOnStart: true,
}
config.ircbot = {
enabled: false,
emitUpdates: false,
muteSoft: true,
channel: '#your-channel',
server: 'irc.freenode.net',
botName: 'gekkobot'
}
config.telegrambot = {
enabled: false,
emitUpdates: false,
token: 'YOUR_TELEGRAM_BOT_TOKEN',
botName: 'gekkobot'
}
config.twitter = {
// sends pushbullets if true
enabled: false,
// Send 'Gekko starting' message if true
sendMessageOnStart: false,
// disable advice printout if it's soft
muteSoft: false,
tag: '[GEKKO]',
// twitter consumer key
consumer_key: '',
// twitter consumer secret
consumer_secret: '',
// twitter access token key
access_token_key: '',
// twitter access token secret
access_token_secret: ''
};
config.xmppbot = {
enabled: false,
emitUpdates: false,
client_id: 'jabber_id',
client_pwd: 'jabber_pw',
client_host: 'jabber_server',
client_port: 5222,
status_msg: 'I\'m online',
receiver: 'jabber_id_for_updates'
}
config.campfire = {
enabled: false,
emitUpdates: false,
nickname: 'Gordon',
roomId: null,
apiKey: '',
account: ''
}
config.redisBeacon = {
enabled: false,
port: 6379, // redis default
host: '127.0.0.1', // localhost
// On default Gekko broadcasts
// events in the channel with
// the name of the event, set
// an optional prefix to the
// channel name.
channelPrefix: '',
broadcast: [
'candle'
]
}
config.slack = {
enabled: false,
token: '',
sendMessageOnStart: true,
muteSoft: true,
channel: '' // #tradebot
}
config.ifttt = {
enabled: false,
eventName: 'gekko',
makerKey: '',
muteSoft: true,
sendMessageOnStart: true
}
config.candleWriter = {
enabled: false
}
config.adviceWriter = {
enabled: false,
muteSoft: true,
}
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// CONFIGURING ADAPTER
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
config.adapter = 'sqlite';
config.sqlite = {
path: 'plugins/sqlite',
dataDirectory: 'history',
version: 0.1,
journalMode: require('./web/isWindows.js') ? 'DELETE' : 'WAL',
dependencies: []
}
// Postgres adapter example config (please note: requires postgres >= 9.5):
config.postgresql = {
path: 'plugins/postgresql',
version: 0.1,
connectionString: 'postgres://user:pass@localhost:5432', // if default port
database: null, // if set, we'll put all tables into a single database.
schema: 'public',
dependencies: [{
module: 'pg',
version: '6.1.0'
}]
}
// Mongodb adapter, requires mongodb >= 3.3 (no version earlier tested)
config.mongodb = {
path: 'plugins/mongodb',
version: 0.1,
connectionString: 'mongodb://mongodb/gekko', // connection to mongodb server
dependencies: [{
module: 'mongojs',
version: '2.4.0'
}]
}
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// CONFIGURING BACKTESTING
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// Note that these settings are only used in backtesting mode, see here:
// @link: https://gekko.wizb.it/docs/commandline/backtesting.html
config.backtest = {
daterange: 'scan',
batchSize: 50
}
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// CONFIGURING IMPORTING
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
config.importer = {
daterange: {
// NOTE: these dates are in UTC
from: "2018-02-01 00:00:00"
}
}
// set this to true if you understand that Gekko will
// invest according to how you configured the indicators.
// None of the advice in the output is Gekko telling you
// to take a certain position. Instead it is the result
// of running the indicators you configured automatically.
//
// In other words: Gekko automates your trading strategies,
// it doesn't advice on itself, only set to true if you truly
// understand this.
//
// Not sure? Read this first: https://github.com/askmike/gekko/issues/201
config['I understand that Gekko only automates MY OWN trading strategies'] = true;
module.exports = config;
the result:
[attachment=39]
and after long time:
[attachment=40]
API keys - susitronix - 02-18-2018
Hi dear
You must set the API keys into your config.js
Under key enter the API key
Under Secret enter your API secret
First in your bitfinex account you MUST CREATE a new API key AND enable options like Trading AND read your FUNDS
Otherwise gekko HAS NO ACCESS TO YOUR ACCOUNT and cannot read your balances.
THIS KEY WOULD BE ONLY FOR GEKKO
for other Apps you would create a new API in bitfinex
Code:
// Want Gekko to perform real trades on buy or sell advice?
// Enabling this will activate trades for the market being
// watched by `config.watch`.
config.trader = {
enabled: true,
key: 'xxxxxxx',
secret: 'xxxxx',
username: '', // your username, only required for specific exchanges.
passphrase: '', // GDAX, requires a passphrase.
orderUpdateDelay: 1, // Number of minutes to adjust unfilled order prices
}RE: API keys - henry - 02-18-2018
(02-18-2018, 12:37 AM)thanks my friend but i set API key in my config file just dont want to show them in public and set with xxxx if you see my result photo gekko show my btc in my bitfinex account and just dont make any trade... Wrote: Hi dear
You must set the API keys into your config.js
Under key enter the API key
Under Secret enter your API secret
First in your bitfinex account you MUST CREATE a new API key AND enable options like Trading AND read your FUNDS
Otherwise gekko HAS NO ACCESS TO YOUR ACCOUNT and cannot read your balances.
THIS KEY WOULD BE ONLY FOR GEKKO
for other Apps you would create a new API in bitfinex
Code:// Want Gekko to perform real trades on buy or sell advice?
// Enabling this will activate trades for the market being
// watched by `config.watch`.
config.trader = {
enabled: true,
key: 'xxxxxxx',
secret: 'xxxxx',
username: '', // your username, only required for specific exchanges.
passphrase: '', // GDAX, requires a passphrase.
orderUpdateDelay: 1, // Number of minutes to adjust unfilled order prices
}
RE: never trading - henry - 02-21-2018
no one to help? its very difficult?
RE: never trading - ankasem - 02-21-2018
nice clarifications to you
Get the bitfinex stock (api).
Write (key) (secret)
// watched by `config.watch`.
config.trader = {
enabled: true,
key: 'xxxxxxx',
secret: 'xxxxx',
username: '', // your username, only required for specific exchanges.
passphrase: '', // GDAX, requires a passphrase.
RE: never trading - henry - 02-21-2018
(02-21-2018, 06:32 AM)i said i write secret and key without problem and gekko can connect to my bitfinex account but after long time no trade and dont make first trade you just say enter sexrect and key?!!!!!!!! ankasem Wrote: nice clarifications to you
Get the bitfinex stock (api).
Write (key) (secret)
// watched by `config.watch`.
config.trader = {
enabled: true,
key: 'xxxxxxx',
secret: 'xxxxx',
username: '', // your username, only required for specific exchanges.
passphrase: '', // GDAX, requires a passphrase.