Install failure - npm - Printable Version

Install failure - npm - Printable Version

+- Gekko Forum (https://forum.gekko.wizb.it)
+-- Forum: Gekko (https://forum.gekko.wizb.it/forum-13.html)
+--- Forum: Technical Support (https://forum.gekko.wizb.it/forum-19.html)
+--- Thread: Install failure - npm (/thread-57172.html)

Install failure - npm - pingywon - 05-16-2018

Setting up a rasb pi to run gekko.

I get this error:

Code:
pi@Changchang:~ $ cd gekko/

pi@Changchang:~/gekko $ sudo npm install sqlite --unsafe-perm

> sqlite3@3.1.13 install /home/pi/gekko/node_modules/sqlite3

> node-pre-gyp install --fallback-to-build

node-pre-gyp ERR! Tried to download(403): https://mapbox-node-binary.s3.amazonaws.com/sqlite3/v3.1.13/node-v57-linux-arm.tar.gz

node-pre-gyp ERR! Pre-built binaries not found for sqlite3@3.1.13 and node@8.11.2 (node-v57 ABI) (falling back to source compile with node-gyp)

make: Entering directory '/home/pi/gekko/node_modules/sqlite3/build'

  ACTION deps_sqlite3_gyp_action_before_build_target_unpack_sqlite_dep Release/obj/gen/sqlite-autoconf-3150000/sqlite3.c

  TOUCH Release/obj.target/deps/action_before_build.stamp

  CC(target) Release/obj.target/sqlite3/gen/sqlite-autoconf-3150000/sqlite3.o

Any help would be GREAT! TIA.

RE: Install failure - npm - Ballsy - 05-16-2018

Try having a look at

https://forum.gekko.wizb.it/thread-54429.html

And

https://forum.gekko.wizb.it/thread-1497.html

RE: Install failure - npm - pingywon - 05-17-2018

Hey thanks for the reply. I formatted my pi install and stood up the SD card again.

I am still getting a bunch of errors at all different points of trying to follow along the tuts.

In following the tut @
https://forum.gekko.wizb.it/thread-1497.html

I get to

Code:
pi@ChangChang:~/gekko $ npm install tulind --only=production

> tulind@0.8.10 install /home/pi/gekko/node_modules/tulind

> node-pre-gyp install --fallback-to-build

node-pre-gyp ERR! Tried to download(404): https://tulipnode.s3.amazonaws.com/tulind/v0.8.10/Release/tulind-v0.8.10-node-v48-linux-arm.tar.gz

node-pre-gyp ERR! Pre-built binaries not found for tulind@0.8.10 and node@6.14.2 (node-v48 ABI, glibc) (falling back to source compile with node-gyp)

make: Entering directory '/home/pi/gekko/node_modules/tulind/build'

  CXX(target) Release/obj.target/tulind/tulind.o

../tulind.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE startbyindex(Nan::NAN_METHOD_ARGS_TYPE)’:

../tulind.cpp:72:22: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]

     if (ind->options != options->Length()) {

         ~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~

../tulind.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE callbyindex(Nan::NAN_METHOD_ARGS_TYPE)’:

../tulind.cpp:127:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]

     if (ind->inputs != inputs->Length()) {

         ~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~

../tulind.cpp:134:22: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]

     if (ind->options != options->Length()) {

         ~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~

../tulind.cpp:236:85: warning: ‘v8::Local<v8::Value> Nan::MakeCallback(v8::Local<v8::Object>, v8::Local<v8::Function>, int, v8::Local<v8::Value>*)’ is deprecated [-Wdeprecated-declarations]

     Nan::MakeCallback(Nan::GetCurrentContext()->Global(), callbackHandle, 2, cb_argv);

                                                                                     ^

In file included from ../tulind.cpp:25:0:

../../nan/nan.h:929:46: note: declared here

   NAN_DEPRECATED inline v8::Local<v8::Value> MakeCallback(

                                              ^~~~~~~~~~~~

  CC(target) Release/obj.target/tulind/external/tiamalgamation.o

  SOLINK_MODULE(target) /home/pi/gekko/node_modules/tulind/lib/binding/Release/node-v48-linux-arm/tulind.node

  COPY Release/tulind.node

make: Leaving directory '/home/pi/gekko/node_modules/tulind/build'

gekko@0.5.14 /home/pi/gekko

└─┬ tulind@0.8.10

  ├── bindings@1.3.0

  ├── minctest@0.0.2

  └─┬ node-pre-gyp@0.9.1

    ├── detect-libc@1.0.3

    ├─┬ needle@2.2.1

    │ └── sax@1.2.4

    ├─┬ nopt@4.0.1

    │ ├── abbrev@1.1.1

    │ └─┬ osenv@0.1.5

    │   ├── os-homedir@1.0.2

    │   └── os-tmpdir@1.0.2

    ├─┬ npm-packlist@1.1.10

    │ ├── ignore-walk@3.0.1

    │ └── npm-bundled@1.0.3

    ├─┬ npmlog@4.1.2

    │ ├─┬ are-we-there-yet@1.1.4

    │ │ └─┬ readable-stream@2.3.6

    │ │   ├── isarray@1.0.0

    │ │   ├── process-nextick-args@2.0.0

    │ │   └── string_decoder@1.1.1

    │ ├── console-control-strings@1.1.0

    │ ├─┬ gauge@2.7.4

    │ │ ├── aproba@1.2.0

    │ │ ├── has-unicode@2.0.1

    │ │ ├── signal-exit@3.0.2

    │ │ ├─┬ string-width@1.0.2

    │ │ │ ├── code-point-at@1.1.0

    │ │ │ └─┬ is-fullwidth-code-point@1.0.0

    │ │ │   └── number-is-nan@1.0.1

    │ │ └── wide-align@1.1.2

    │ └── set-blocking@2.0.0

    ├─┬ rc@1.2.7

    │ ├── ini@1.3.5

    │ ├── minimist@1.2.0

    │ └── strip-json-comments@2.0.1

    ├── rimraf@2.6.2

    └─┬ tar@4.4.2

      ├── chownr@1.0.1

      ├── fs-minipass@1.2.5

      ├── minipass@2.3.0

      ├── minizlib@1.1.0

      └── yallist@3.0.2

Then I run gekko UI and get:

Code:
pi@ChangChang:~/gekko $ node gekko --ui

    ______   ________  __    __  __    __   ______

   /      \ /        |/  |  /  |/  |  /  | /      \

  /$$$$$$  |$$$$$$$$/ $$ | /$$/ $$ | /$$/ /$$$$$$  |

  $$ | _$$/ $$ |__    $$ |/$$/  $$ |/$$/  $$ |  $$ |

  $$ |/    |$$    |   $$  $$<   $$  $$<   $$ |  $$ |

  $$ |$$$$ |$$$$$/    $$$$$  \  $$$$$  \  $$ |  $$ |

  $$ \__$$ |$$ |_____ $$ |$$  \ $$ |$$  \ $$ \__$$ |

  $$    $$/ $$       |$$ | $$  |$$ | $$  |$$    $$/

   $$$$$$/  $$$$$$$$/ $$/   $$/ $$/   $$/  $$$$$$/

        Gekko v0.5.14

        I'm gonna make you rich, Bud Fox.

events.js:160

      throw er; // Unhandled 'error' event

      ^

Error: listen EADDRINUSE 0.0.0.0:3000

    at Object.exports._errnoException (util.js:1020:11)

    at exports._exceptionWithHostPort (util.js:1043:20)

    at Server._listen2 (net.js:1271:14)

    at listen (net.js:1307:10)

    at net.js:1417:9

    at _combinedTickCallback (internal/process/next_tick.js:83:11)

    at process._tickCallback (internal/process/next_tick.js:104:9)

    at Module.runMain (module.js:613:11)

    at run (bootstrap_node.js:394:7)

    at startup (bootstrap_node.js:160:9)

    at bootstrap_node.js:507:3

Sorry I feel like I am going in circles here. Im not even sure exactly what the issue is. I get gekko stood up and then I get sql errors. try to install it and it fails etc etc... round and round.

Any advice?

RE: Install failure - npm - ankasem - 05-17-2018

hi
reformat node 8.x at the bottom
execute the following commands after completing the setup (curl) format
---------------------------------------------------------------------------------------------------------------------
.
.
.
.

curl -sL https://deb.nodesource.com/setup_8.x | sudo -E bash -
sudo apt-get install -y nodejs
sudo apt-get install -y build-essential
sudo apt-get install git
git clone git://github.com/askmike/gekko.git
cd gekko
npm install --only=production
npm install talib
npm install tulind
sudo apt autoremove
node gekko --ui

RE: Install failure - npm - pingywon - 05-18-2018

(05-17-2018, 07:44 PM)ankasem Wrote: hi
reformat node 8.x at the bottom
execute the following commands after completing the setup (curl) format
---------------------------------------------------------------------------------------------------------------------
.
.
.
.

curl -sL https://deb.nodesource.com/setup_8.x | sudo -E bash -
sudo apt-get install -y nodejs
sudo apt-get install -y build-essential
sudo apt-get install git
git clone git://github.com/askmike/gekko.git
cd gekko
npm install --only=production
npm install talib
npm install tulind
sudo apt autoremove
node gekko --ui

Thank you for the reply!

I followed your directions and I am getting this error:

Code:
Gekko v0.5.14

        I'm gonna make you rich, Bud Fox.

events.js:183

      throw er; // Unhandled 'error' event

      ^

Error: listen EADDRINUSE 0.0.0.0:3000

    at Object._errnoException (util.js:992:11)

    at _exceptionWithHostPort (util.js:1014:20)

    at Server.setupListenHandle [as _listen2] (net.js:1355:14)

    at listenInCluster (net.js:1396:12)

    at doListen (net.js:1505:7)

    at _combinedTickCallback (internal/process/next_tick.js:141:11)

    at process._tickCallback (internal/process/next_tick.js:180:9)

    at Function.Module.runMain (module.js:695:11)

    at startup (bootstrap_node.js:191:16)

    at bootstrap_node.js:612:3

I am willing to format the SD and start over from the beginning if someone can give me a path to success. every tut I follow verbatim gets me into trouble with all kinds of errors.

Please advise.

No one made a pi image for gekko? Sad

RE: Install failure - npm - pingywon - 05-20-2018

(05-18-2018, 02:14 PM)pingywon Wrote:
(05-17-2018, 07:44 PM)ankasem Wrote: hi
reformat node 8.x at the bottom
execute the following commands after completing the setup (curl) format
---------------------------------------------------------------------------------------------------------------------
.
.
.
.

curl -sL https://deb.nodesource.com/setup_8.x | sudo -E bash -
sudo apt-get install -y nodejs
sudo apt-get install -y build-essential
sudo apt-get install git
git clone git://github.com/askmike/gekko.git
cd gekko
npm install --only=production
npm install talib
npm install tulind
sudo apt autoremove
node gekko --ui

Thank you for the reply!

I followed your directions and I am getting this error:

Code:
Gekko v0.5.14 I'm gonna make you rich, Bud Fox. events.js:183 throw er; // Unhandled 'error' event ^ Error: listen EADDRINUSE 0.0.0.0:3000 at Object._errnoException (util.js:992:11) at _exceptionWithHostPort (util.js:1014:20) at Server.setupListenHandle [as _listen2] (net.js:1355:14) at listenInCluster (net.js:1396:12) at doListen (net.js:1505:7) at _combinedTickCallback (internal/process/next_tick.js:141:11) at process._tickCallback (internal/process/next_tick.js:180:9) at Function.Module.runMain (module.js:695:11) at startup (bootstrap_node.js:191:16) at bootstrap_node.js:612:3

I am willing to format the SD and start over from the beginning if someone can give me a path to success. every tut I follow verbatim gets me into trouble with all kinds of errors.

Please advise.

No one made a pi image for gekko?

Hey guys. Im willing to start over with a new image on the SD if someone can help me or lay out for me detailed 1x1 instructions to get everything up and running on a RasPi 3

RE: Install failure - npm - pingywon - 05-21-2018

OK! I got it running.

thanks for all the help guys.

Here are my notes on how I got it to work on rasb pi 3

Code:
curl -sL https://deb.nodesource.com/setup_8.x | sudo -E bash -

sudo apt-get install -y nodejs

sudo apt-get install -y build-essential 

sudo apt-get install git

git clone git://github.com/askmike/gekko.git

cd gekko

npm install --only=production (Ignore warnings and WAITTTTTT)

npm install talib

npm install tulind

sudo apt autoremove

node gekko --ui

cd ~/gekko/web/vue

nano UI.config (for headless mode)

Now to just get it to run at boot up

RE: Install failure - npm - Ballsy - 05-21-2018

(05-21-2018, 06:12 PM)pingywon Wrote: OK! I got it running.

thanks for all the help guys.

Here are my notes on how I got it to work on rasb pi 3

Code:
curl -sL https://deb.nodesource.com/setup_8.x | sudo -E bash - sudo apt-get install -y nodejs sudo apt-get install -y build-essential sudo apt-get install git git clone git://github.com/askmike/gekko.git cd gekko npm install --only=production (Ignore warnings and WAITTTTTT) npm install talib npm install tulind sudo apt autoremove node gekko --ui cd ~/gekko/web/vue nano UI.config (for headless mode)

Now to just get it to run at boot up

Glad you've got it working, I've got a pi3 that I'm going to be using soon.
Is that from a fresh install?
Have you added any of the backtesting algorithms?

If you do I'd appreciate if you added the steps you take to get them working.

RE: Install failure - npm - pingywon - 05-21-2018

(05-21-2018, 08:17 PM)Ballsy Wrote:
(05-21-2018, 06:12 PM)pingywon Wrote: OK! I got it running.

thanks for all the help guys.

Here are my notes on how I got it to work on rasb pi 3

Code:
curl -sL https://deb.nodesource.com/setup_8.x | sudo -E bash - sudo apt-get install -y nodejs sudo apt-get install -y build-essential sudo apt-get install git git clone git://github.com/askmike/gekko.git cd gekko npm install --only=production (Ignore warnings and WAITTTTTT) npm install talib npm install tulind sudo apt autoremove node gekko --ui cd ~/gekko/web/vue nano UI.config (for headless mode)

Now to just get it to run at boot up

Glad you've got it working, I've got a pi3 that I'm going to be using soon.
Is that from a fresh install?
Have you added any of the backtesting algorithms?

If you do I'd appreciate if you added the steps you take to get them working.

that is from a fresh install. yes!

the only thing I ommitted was the

apt-get update
apt-get upgrade

and the config of SSH and stuff like that. From a Gekko point of view that is a totally fresh install.

IGNORE the warnings and errors as noted and WAIT. some of it takes a lot longer to run then you think it should.

I just got it up a couple of hours ago. I have not done much else to it yet - I will keep this thread in mind as I do tho.

Good luck!

RE: Install failure - npm - Kommando98 - 06-24-2018

(05-21-2018, 06:12 PM)pingywon Wrote: OK! I got it running.

thanks for all the help guys.

Here are my notes on how I got it to work on rasb pi 3

Code:
curl -sL https://deb.nodesource.com/setup_8.x | sudo -E bash - sudo apt-get install -y nodejs sudo apt-get install -y build-essential sudo apt-get install git git clone git://github.com/askmike/gekko.git cd gekko npm install --only=production (Ignore warnings and WAITTTTTT) npm install talib npm install tulind sudo apt autoremove node gekko --ui cd ~/gekko/web/vue nano UI.config (for headless mode)

Now to just get it to run at boot up

Thanks for the write-up, helped me get mine setup. For running at boot up, try using some of the tips on this site:
https://www.dexterindustries.com/howto/run-a-program-on-your-raspberry-pi-at-startup/