[TUT] RaspberryPi3++Headless++VNC-Desktop
#1
RaspberryPi3 Desktop Headless VNC-Viewer Tutorial by philipp wyler
(i recomend buying a highspeed SDHC SDcard that makes raspi boot much faster)


    >>>Download Raspbian (faster install than noobs):
    //Raspbian Stretch with Desktop ZIP/torrent
    https://www.raspberrypi.org/downloads/raspbian/


    >>>Unzip using 7zip (recomended):
    //Download freeware
    http://download.cnet.com/7-Zip/3000-2250...45185.html
>>>Unzip your .img file using 7zip    //goto /user/downloads/
    

    >>>Prepare your SDHC card with SdCardFormatter:
    //Download freeware
    https://www.sdcard.org/downloads/formatter_4/
>>>Lounch SdCardFormatter and format SDHC-card   //(((((WARNING))))) SELECT APPROPRIATE DRIVE!!!


    >>>burn the Image onto your SDHC using Win32DiskImager:
    //Download freeware Win32DiskImager
    https://sourceforge.net/projects/win32di...t/download
>>>Lounch Win32DiskImager
>>>>>>>(((((WARNING))))) under device tab your SDHC location MUST BE SELECTED (drive ESmile
>>>>>>>click the small folder icon on top and SELECT YOUR RASPBIAN IMAGEFILE.
>>>>>>>click [WRITE]   //wait until finished. Installation of Raspbian is done.

    >>>Now we initiate the pi for lan/Wlan ssh connection:
>>>Open NOTEPAD (windows click start, write notepad and press enter to start notepad)
>>>SAVE AS: //click tab [file] [save as]   (no text needed)

>>>>>>>Location: //select your RaspberryPi Folder ON THE SDHC
>>>>>>>File name: "ssh"   //type: "ssh" WITH quotation mark!
>>>>>>>Save as type: All files >>> click SAVE


(((((WARNING))))) ALWAYS USE "SAVELY REMOVE HARDWARE" from your windows taskbar right side.


>>>Insert SDHC into your RaspberryPi WHILE POWER OFF.


>>>PowerON your RaspberryPi and dont touch for aprox. 2 minutes.


    >>>First we search our Network for find out the IP-adress, wich the DNS-server has choosen for for the Pi.
    >>>i am using: ios netAnalyzer (neat tool)
    //Download freeware
    http://download.cnet.com/Network-Scanner...59296.html
>>>Search for the IP address with name raspberry
    

    >>>for the configuration we use PUTTY CLI-cmd  (CLI=comand line interface)
    //Download freeware
    https://putty.org/
>>>Lounch PUTTY
>>>Enter your IP in the Field: Host Name (or IP address) //(192,133,1,75=FALSE) (192.133.1.75=TRUE)
>>>Click open enters the CLI-cmd
>>>login as:pi       //default user name
>>>password:raspberry     //default password

// CLI should look like this    
Code:
pi@raspberrypi:~ $


    >>>time for configuration: type
Code:
sudo raspi-config


//with the cursors select:    //initiate SDHC size
[7 Advanced Options]       //now cursor-right/left UNTIL <Select> is selected-->press enter
>>>choose: [Expand Filesystem]   //now cursor-right/left UNTIL <Select> is selected-->press enter

//with the cursors select:    //boot into desktop OS
[3 Boot Options]    //now cursor-right/left UNTIL <Select> is selected-->press enter
[B1 Desktop / CLI]    //now cursor-right/left UNTIL <Select> is selected-->press enter
[B4 Desktop Autologin]    //now cursor-right/left UNTIL <Select> is selected-->press enter

//with the cursors select:    //Enable VNC
[5 Interfacing Options]    //now cursor-right/left UNTIL <Select> is selected-->press enter
[P3 VNC]    //now cursor-right/left UNTIL <Select> is selected-->press enter

//close the config:
cursor-right/left UNTIL <Finish> is selected-->press enter
Like to REBOOT? select [YES]
>>>close PUTTY CLI-cmd


>>>after reboot open PUTTY CLI-cmd
    >>>configure the display options for VNC: //by editing the nano config text file

Code:
sudo nano /boot/config.txt


//use cursor up/down to navigate BELOW #hdmi_mode=1

Code:
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
hdmi_ignore_edid=5000080  //INSERT LINE AND ADD THIS TEXT
hdmi_group=2          //INSERT LINE AND ADD THIS TEXT
hdmi_mode=85          //INSERT LINE AND ADD THIS TEXT  //this will set the display Resolution @60Hz
                               //85=1280x720; 16=1024x768; 77=2560x1600
#uncomment to force a hdmi mode rather than........

    >>>finish Config press:
[ctrl] + [X]    //exit
[Y] = Yes    //do you want to save the file
[enter]        //File Name to write? //dont rename just hit enter!


//Reboot again
Code:
sudo reboot

>>>close PUTTY CLI-cmd


    >>>Download VNCviewer for Windows:
https://www.realvnc.com/en/connect/downl...r/windows/
>>>unzip to your desktop or C-drive   //no installation needed
>>>run VNCviewer
>>>enter your IP and press enter
>>>Username:pi       //default user name
>>>Password:raspberry     //default password
>>>OK



    Now Your inside RaspberryPi Desktop
    First we will FULLY update the Raspberry:
>>>Open Terminal=CLI-cmd and type:
Code:
sudo apt-get update    //Raspbian will fetch the Updates
sudo apt-get upgrade    //Raspbian will apply the Updates //wait patient!

The Raspberry installation is finnish.
Next we install Gekko:
 
*/This is from User: rick_rolled thanks again ;-)
https://forum.gekko.wizb.it/thread-10.html
/*

>>>open VNC=raspi desktop
>>>open Terminal (CLI-cmd)   //From nnow on we have a CLI in the raspi Desktop. PUTTY CLI not needed enymore.

Code:
    //Install nodejs and npm (https://www.raspberrypi.org/forums/viewt...p?t=141770)

curl -sL https://deb.nodesource.com/setup_6.x | sudo bash -
           // 6.x is latest verstion, but should be replaced by current version if available
sudo apt-get install nodejs -y

   //Install git
sudo apt-get install git

   //Install gekko
git clone git://github.com/askmike/gekko.git
cd gekko

   //Install gekko dependencies    //wait patient>>>dont touch until complete!
npm install --only=production

   //Install Tulip indicators
npm install tulind --only=production       //@rick_rolled just the tulip indicators were missing


   //Start gekko
node gekko --ui  (must be in ~/gekko) OR node /filepath/gekko --ui

This is it.
(((((NOTICE))))) the Password must be changed now because of enybody knows the Default Password:
>>>On Raspi Desktop top left, click on the fruit symbole.
>>>>>>>[Preferences]
>>>>>>>System (Tab)
>>>>>>>[Change Password]

Hope this helps.
Thanks: rick_rolled, Alexander Baran-Harper, AskMike, tommiehansen

I try askMikes Hint for Tip:
BTC 392hHafnMmHS8JWT6yDjdsX6mtEhQvTAq8
ETH 0x01d1897cE56347D936B9d8aceb422D8D2C958401
  Reply


Messages In This Thread
[TUT] RaspberryPi3++Headless++VNC-Desktop - by susitronix - 02-16-2018, 04:36 AM

Forum Jump:


Users browsing this thread: